Skip to content
PCTestHub

WHEA_UNCORRECTABLE_ERROR (0x124) blue screen: what it means and how to fix it

The hardware reported an error it could not correct. Below you will find the most common causes and the steps to fix it, in order. To look up another code, use the search box.

Blue screenWHEA_UNCORRECTABLE_ERROR · 0x00000124

The hardware reported an error it could not correct

The hardware itself warned Windows about a serious error. Microsoft says it is usually a physical fault: heat, memory, a CPU that is starting to fail, or overclocking. A driver causing it is less likely, but possible.

Why it happens

  • Unstable overclock, undervolt or XMP profile.
  • High temperature from dust, dried-out thermal paste or fans that do not spin.
  • Faulty RAM.
  • A failing CPU, motherboard or power supply.
  • Outdated BIOS.

How to fix it

  1. If you raised the speed of the CPU, graphics card or RAM (overclock, XMP or EXPO profiles, undervolt), go back to the default values in the BIOS or in the program you used.
  2. Check temperatures and airflow: dust in the heatsink or dried-out thermal paste make the computer freeze or shut down under load (games, rendering, video).
  3. Test the RAM: press Windows + R, type mdsched and choose «Restart now and check for problems». If you have two sticks, also try with one at a time.
  4. On a desktop PC, check the power supply and its cables: an old or underpowered PSU causes freezes and restarts when the computer is working hard.
  5. Update the BIOS (UEFI) only from the support page of your PC or motherboard maker, with the charger connected and without turning the computer off during the process.
  6. Update the graphics, chipset, network and storage drivers from the support page of your PC or laptop maker. If the problem started after updating one, roll it back: Device Manager › right-click the device › Properties › Driver › Roll Back Driver.

Still happening? It is one of the errors that most strongly points to hardware: if it persists with everything at default, a diagnosis with known-good test parts is worth it.

Meaning based on Microsoft's official documentation. The steps are general guidance: if you are not sure, ask a technician for help.

How to find the code of a blue screen

The error screen shows the code on the «Stop code» line (for example CRITICAL_PROCESS_DIED) and sometimes «What failed» with the file that caused it (for example nvlddmkm.sys). In recent Windows 11 versions that screen is black instead of blue, but the codes are the same.

If the computer restarts before you can read it, the code is saved: press Windows + R, type eventvwr and go to Windows Logs › System. Look for an event with source BugCheck: it shows the code in hexadecimal (for example 0x0000007e), which you can also type in the search box. To stop Windows from restarting by itself so you can read the screen, go to Advanced system settings › Startup and Recovery › Settings and uncheck «Automatically restart».

What to do with any blue screen

This works for any code, including the ones without their own explanation. These are Microsoft's general steps, in the order worth trying them:

  1. Write down the code and the file shown in «What failed», if any: they tell you what failed.
  2. Think about what changed before it started (a program, a driver, an update or a part) and undo it. System Restore (rstrui) goes back to an earlier point without touching your documents.
  3. Install Windows updates and the drivers from your PC maker's website; if the problem started with a new driver, roll back to the previous one.
  4. Update the BIOS from the maker's website, with the charger connected.
  5. Test the hardware: memory with mdsched and the drive with chkdsk C: /f. If you raised speeds (overclock or XMP), go back to default values.
  6. Scan for malware with Windows Security (Microsoft Defender Offline scan).
  7. Free up space: Microsoft recommends 10% to 15% of the drive.
  8. Repair Windows with DISM /Online /Cleanup-Image /RestoreHealth and sfc /scannow in Command Prompt as administrator.

If Windows does not start, the Recovery Environment appears after two or three failed starts: from Troubleshoot › Advanced options you can use Startup Repair, System Restore, Uninstall Updates or enter Safe Mode.

Most common blue screens

Windows Update errors

Activation errors

Windows startup errors

Errors when opening programs

Meanings come from Microsoft's official documentation (bug check code reference and the page of each error), checked on November 17, 2026. The texts and steps are our own. See all codes → En español