Laptop battery health check: read your battery report
Windows keeps a report with your battery's real capacity. Create it with one command and drop it here: we show you how much it has worn, its cycle count and how long it lasts. The file is analyzed in your browser and never sent anywhere.
- Open the console: press Windows + R, type
cmdand press Enter. - Create the report: type this command and press Enter.
powercfg /batteryreportWindows tells you where it saved thebattery-report.htmlfile (usually inC:\Users\your-name). - Drop it here: drag the file onto the box or choose it with the button.
The report includes your computer's name and the battery serial number: we do not store or send it. Everything is processed in your browser.
What battery health means
Every battery leaves the factory with a design capacity (for example 50,000 mWh). With use and time, the capacity it can actually hold, the full charge capacity, goes down. Health is the ratio between the two: if it holds 40,000 mWh of the original 50,000 today, it is at 80% and lasts about 20% less than when it was new.
When to replace the battery
- 80% or more: it is fine. That is normal wear for the first years.
- Between 60% and 80%: it is worn. It lasts quite a bit less, but if the runtime is enough for you there is no rush.
- Below 60%: it is heavily worn. Replacing it is worth it, especially if the laptop shuts down suddenly with charge left or the battery is swollen (if the keyboard or touchpad is lifting, stop using it and unplug it).
Charge cycles matter too: many laptop batteries are rated for a few hundred full cycles before losing noticeable capacity. The exact figure depends on each manufacturer.
How to take care of a laptop battery
- Avoid heat: do not use it on a bed or cushions that block the vents.
- If the laptop is plugged in most of the time, turn on the mode that limits charging to 80% or 60% if your brand offers it (for example in the Lenovo, ASUS, Dell or HP apps).
- Do not let it drain completely often, or store it for a long time without charge.
Frequently asked questions
Is the powercfg command safe?
Yes. It is a Windows tool that only reads information and creates an HTML file with the report. It does not change any setting and does not need administrator rights.
Why is the health above 100%?
Some new batteries have a real capacity slightly above the design capacity. It also happens when the battery is not calibrated: after a few full cycles the value settles.
The cycle count shows a dash. Is that an error?
No. Some batteries do not report their cycle count to Windows. Health is still calculated from the capacities.
Does it work on a Mac?
No, the report is a Windows one. On a Mac, open the Apple menu, hold the Option key, choose «System Information» and go to «Power»: you will see the cycle count and the battery condition.
Is the file uploaded anywhere?
No. The file is read and analyzed inside your browser. It is not sent to any server or stored.
More tools: Windows repair commands · keyboard test · all tools · en español