Skip to content
PCTestHub

BUGCODE_USB_DRIVER (0xFE) blue screen: what it means and how to fix it

Error in a USB driver. Below you will find the most common causes and the steps to fix it, in order. To look up another code, use the search box.

Blue screenBUGCODE_USB_DRIVER · 0x000000FE

Error in a USB driver

An error occurred in a USB driver. It is usually caused by a problematic USB device, an outdated chipset or USB driver, or a faulty hub or adapter.

Why it happens

  • A faulty USB device, hub or adapter.
  • Outdated USB or chipset drivers.
  • Power problems on USB ports.

How to fix it

  1. Disconnect everything that is not essential (external drives, USB hubs, adapters, printers) and check whether the error comes back.
  2. If the error happens when you connect a specific device, try another port and another cable.
  3. Update the graphics, chipset, network and storage drivers from the support page of your PC or laptop maker. If the problem started after updating one, roll it back: Device Manager › right-click the device › Properties › Driver › Roll Back Driver.
  4. Update the BIOS (UEFI) only from the support page of your PC or motherboard maker, with the charger connected and without turning the computer off during the process.
  5. Install pending updates in Settings › Windows Update (including optional driver updates) and restart.

Meaning based on Microsoft's official documentation. The steps are general guidance: if you are not sure, ask a technician for help.

How to find the code of a blue screen

The error screen shows the code on the «Stop code» line (for example CRITICAL_PROCESS_DIED) and sometimes «What failed» with the file that caused it (for example nvlddmkm.sys). In recent Windows 11 versions that screen is black instead of blue, but the codes are the same.

If the computer restarts before you can read it, the code is saved: press Windows + R, type eventvwr and go to Windows Logs › System. Look for an event with source BugCheck: it shows the code in hexadecimal (for example 0x0000007e), which you can also type in the search box. To stop Windows from restarting by itself so you can read the screen, go to Advanced system settings › Startup and Recovery › Settings and uncheck «Automatically restart».

What to do with any blue screen

This works for any code, including the ones without their own explanation. These are Microsoft's general steps, in the order worth trying them:

  1. Write down the code and the file shown in «What failed», if any: they tell you what failed.
  2. Think about what changed before it started (a program, a driver, an update or a part) and undo it. System Restore (rstrui) goes back to an earlier point without touching your documents.
  3. Install Windows updates and the drivers from your PC maker's website; if the problem started with a new driver, roll back to the previous one.
  4. Update the BIOS from the maker's website, with the charger connected.
  5. Test the hardware: memory with mdsched and the drive with chkdsk C: /f. If you raised speeds (overclock or XMP), go back to default values.
  6. Scan for malware with Windows Security (Microsoft Defender Offline scan).
  7. Free up space: Microsoft recommends 10% to 15% of the drive.
  8. Repair Windows with DISM /Online /Cleanup-Image /RestoreHealth and sfc /scannow in Command Prompt as administrator.

If Windows does not start, the Recovery Environment appears after two or three failed starts: from Troubleshoot › Advanced options you can use Startup Repair, System Restore, Uninstall Updates or enter Safe Mode.

Most common blue screens

Windows Update errors

Activation errors

Windows startup errors

Errors when opening programs

Meanings come from Microsoft's official documentation (bug check code reference and the page of each error), checked on November 17, 2026. The texts and steps are our own. See all codes → En español