Drive read error at startup
It means «the device reported an I/O error». At startup it indicates that Windows could not read the drive properly: it is almost always the drive, its cable or its connector.
Why it happens
- A failing hard drive or SSD.
- A loose or faulty SATA or power cable.
- A badly seated SSD.
How to fix it
- Before trying fixes, back up your important files to another drive or to the cloud: if the drive is failing, every start counts.
- On a desktop PC, check or replace the drive cables; on a laptop, check that the drive or SSD is properly seated.
- If Windows does not start, open the Recovery Environment (it appears on its own after two or three failed starts, or from a Windows installation USB › Repair your computer). Under Troubleshoot › Advanced options you have Startup Repair, System Restore, Uninstall Updates and Startup Settings (to enter Safe Mode).
- Check the health of the hard drive or SSD (SMART status) with its maker's free tool and, if it is an SSD, update its firmware from there.
Meaning based on Microsoft's official documentation (more information on this other Microsoft page). The steps are general guidance: if you are not sure, ask a technician for help.