Skip to content
PCTestHub
Home/Windows repair commands

Windows repair commands: sfc /scannow, DISM, chkdsk and more

The official Windows commands to repair system files, the drive, Windows Update, the internet connection and startup. Pick your problem, copy the command with one click and see what it does before you run it.

As administrator: right-click the Start button › Terminal (Admin), or search for «cmd» › right-click › Run as administrator. Paste the command with a right-click or Ctrl + V and press Enter.

  • Windows errors

    Repair the Windows image (DISM)

    DISM /Online /Cleanup-Image /RestoreHealth

    Where: Command Prompt or Terminal as administrator.

    Repairs the Windows component store by downloading healthy files from Windows Update. Run it before sfc, because sfc uses that store to repair files.

    It takes several minutes and can sit at the same percentage for a long time: that is normal. It needs an internet connection.

    Microsoft documentation ↗

  • Windows errors

    Repair system files (sfc /scannow)

    sfc /scannow

    Where: Command Prompt or Terminal as administrator.

    Checks every protected Windows file and replaces damaged ones with a healthy copy. It is the first step for odd errors, programs that will not open or blue screens.

    Do not close the window until it reaches 100%. If it says it found files it could not repair, run DISM and then sfc again.

    Microsoft documentation ↗

  • Windows errors

    Check whether the Windows image is damaged

    DISM /Online /Cleanup-Image /CheckHealth

    Where: Command Prompt or Terminal as administrator.

    Only reports whether Windows has already detected damage in its image (healthy, repairable or not repairable). It does not repair anything and takes seconds.

    Microsoft documentation ↗

  • Drive

    Check the drive without restarting

    chkdsk C: /scan

    Where: Command Prompt or Terminal as administrator.

    Checks the file system of drive C: while you keep using the computer (NTFS drives only). It is the quickest way to find out if there are errors.

    Microsoft documentation ↗

  • Drive

    Fix drive errors

    chkdsk C: /f

    Where: Command Prompt or Terminal as administrator.

    Fixes file system errors. Since drive C: is in use, Windows offers to check it on the next restart: answer Y and restart.

    Microsoft documentation ↗

  • Drive

    Find bad sectors

    chkdsk C: /r

    Where: Command Prompt or Terminal as administrator.

    Does the same as /f and also looks for bad sectors and recovers whatever can be read. Useful when the drive shows read errors.

    It can take hours on large drives. If the drive is failing, heavy use can make it worse: back up your files first.

    Microsoft documentation ↗

  • Windows Update

    Clear the Windows Update cache

    net stop wuauserv
    rd /s /q %systemroot%\SoftwareDistribution
    net start wuauserv

    Where: Command Prompt or Terminal as administrator.

    Stops the update service, deletes the folder where it keeps downloads and starts it again. It is the step Microsoft suggests when updates fail over and over.

    Updates already downloaded are deleted (they download again) and so is the update history shown in Windows Update.

    Microsoft documentation ↗

  • Internet

    Flush the DNS cache

    ipconfig /flushdns

    Where: Command Prompt or Terminal (no administrator needed).

    Clears the website addresses Windows had stored. Useful when a page will not load on this PC but works on other devices.

    Microsoft documentation ↗

  • Internet

    Reset the network settings (Winsock)

    netsh winsock reset

    Where: Command Prompt or Terminal as administrator.

    Resets the Winsock catalog, the part of Windows that programs use to connect to the internet. It helps when you are connected but programs cannot browse, for example after uninstalling an antivirus or a VPN.

    Restart afterwards. If that is not enough, Windows has «Network reset» in Settings › Network & internet › Advanced network settings.

    Microsoft documentation ↗

  • Won't boot

    Restart into the advanced startup options

    shutdown /r /o

    Where: Command Prompt or Terminal (no administrator needed).

    Restarts the computer straight into the advanced options menu: System Restore, Startup Repair, Uninstall Updates and Safe Mode.

    Microsoft documentation ↗

  • Won't boot

    Rebuild the boot configuration

    bootrec /rebuildbcd

    Where: Recovery Environment › Troubleshoot › Advanced options › Command Prompt.

    Searches the drives for Windows installations and recreates the boot configuration (BCD). It is one of Microsoft's steps for errors such as 0xc000000e or 0xc0000225.

    Try Startup Repair first: it does this and more automatically.

    Microsoft documentation ↗

  • Won't boot

    Repair system files without starting Windows

    sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows

    Where: Recovery Environment › Troubleshoot › Advanced options › Command Prompt.

    Does the same as sfc /scannow, but on a Windows installation that does not start. From the Recovery Environment, the Windows drive may have another letter: check it first with dir C:, dir D:, etc.

    Microsoft documentation ↗

  • Diagnostics

    Test the RAM

    mdsched

    Where: Windows + R (Run) or Command Prompt.

    Opens Windows Memory Diagnostic. Choose «Restart now and check for problems»: when Windows starts again it shows you the result.

  • Diagnostics

    Battery report

    powercfg /batteryreport

    Where: Command Prompt or Terminal (no administrator needed).

    Creates a report with the original and current battery capacity, the cycle count and the usage history. Read it easily with our battery health tool.

  • Diagnostics

    DirectX report (parts and drivers)

    dxdiag

    Where: Windows + R (Run) or Command Prompt.

    Shows the processor, memory, graphics card, display and drivers. With «Save All Information» you get a text file with all of it.

  • Diagnostics

    See Windows errors

    eventvwr

    Where: Windows + R (Run) or Command Prompt.

    Opens Event Viewer. Under Windows Logs › System you find the errors, including blue screens (source «BugCheck»), with their code to look up in Windows error codes.

  • Diagnostics

    See the computer model and parts

    msinfo32

    Where: Windows + R (Run) or Command Prompt.

    Opens System Information: maker, model, BIOS version, processor and installed memory.

  • Drivers and apps

    Back up all drivers

    pnputil /export-driver * D:\drivers

    Where: Command Prompt or Terminal as administrator.

    Copies every installed driver to a folder (replace D:\drivers with a folder on a USB stick or external drive). Very handy before reinstalling Windows.

    Microsoft documentation ↗

  • Drivers and apps

    Install the saved drivers

    pnputil /add-driver D:\drivers\*.inf /subdirs /install

    Where: Command Prompt or Terminal as administrator.

    Installs every driver in the folder at once, including its subfolders, on the devices that need them.

    Microsoft documentation ↗

  • Drivers and apps

    Update all programs

    winget upgrade --all

    Where: Command Prompt or Terminal (no administrator needed).

    Uses the Windows Package Manager (winget) to update installed programs that have a new version. You can list them first with winget upgrade.

    Some programs may ask for administrator permission or close to update.

    Microsoft documentation ↗

  • Drivers and apps

    Go back to an earlier point

    rstrui

    Where: Windows + R (Run) or Command Prompt.

    Opens System Restore to go back to a point before a driver, program or update that caused problems. It does not touch your documents.

In what order to try them

  1. DISM /RestoreHealth and then sfc /scannow: they fix most Windows errors without touching your files.
  2. chkdsk C: /scan: if it finds drive errors, run chkdsk C: /f and restart.
  3. If the problem started after a change, System Restore (rstrui).
  4. If nothing works, Reset this PC (Settings › System › Recovery) or reinstall Windows, after backing up your files.

Command Prompt, PowerShell or Terminal?

These commands work the same in Command Prompt (cmd), PowerShell and Terminal, which opens PowerShell by default on Windows 11. What matters is opening it as administrator when the command needs it: otherwise Windows answers that you do not have permission or that elevation is required.

Frequently asked questions

Do these commands delete my files?

No. sfc, DISM and chkdsk repair Windows and the file system without deleting your documents. Still, if the drive shows errors, back up your files before repairing: a failing drive can get worse.

sfc found corrupt files but could not fix some of them. What now?

Run DISM /Online /Cleanup-Image /RestoreHealth, restart and run sfc /scannow again. If it still cannot, the options are Reset this PC or reinstalling Windows.

DISM fails or gets stuck.

DISM downloads healthy files from Windows Update, so it needs internet and a working Windows Update. If Windows Update also fails, try the command that clears its cache first.

Do they work on Windows 10 and Windows 11?

Yes, every command on this page works on both.

Commands checked against Microsoft's official documentation on November 17, 2026. Got an error code? Look it up in Windows error codes. En español