Online headphone test: left, right and sound
Check that both sides of your headphones or speakers play, that they are wired correctly and which frequencies they reproduce. The sounds are generated in your browser.
Left and right
Phase
«In phase» should sound centered inside your head. «Out of phase» sounds more diffuse, as if it came from the sides. If both sound the same or the other way around, one side has its wires reversed.
Frequency range
A tone that rises from 20 Hz (bass) to 20,000 Hz (treble) in 20 seconds. Press «I can't hear it» when it stops sounding.
Works with wired, Bluetooth and USB headphones and with speakers. With speakers, sit in the middle to tell left from right.
What each test checks
- Left and right: each button plays on one side only. If one side is silent or quiet, it may be the cable, the plug or the balance setting. If they sound swapped, check that you are wearing them correctly (L goes on the left ear).
- Pan: the sound should move smoothly from one ear to the other. If it jumps or cuts out in the middle, there may be a loose connection.
- Phase: detects one side wired backwards, which happens with repaired or home-made headphones and speakers. It is most noticeable with headphones.
- Frequency range: shows the lowest bass and the highest treble your headphones or speakers reproduce. Laptop speakers barely reproduce bass below 100 or 150 Hz: that is normal.
If one side does not play
- Plug: unplug it and plug it back in all the way. If the sound comes and goes when you move the cable, the cable or the plug is damaged.
- Windows balance: in Settings → System → Sound, choose your headphones and check that the left and right volume are equal.
- Mono audio: when it is on, both sides play the same. Change it in Settings → Accessibility → Audio → Mono audio (Windows) or System Settings → Accessibility → Audio (Mac).
- Try another device: if the same happens on your phone or another computer, the problem is the headphones. If they sound fine there, it is the computer's audio output or its settings.
- Bluetooth: remove them from the device list, pair them again and check that they are charged.
If your laptop's headphone jack plays on one side only with every pair you try, or does not detect when you plug them in, the laptop's audio jack may be damaged.
Frequently asked questions
Is it normal not to hear the highest tones?
Yes. With age we stop hearing the highest frequencies: many adults cannot hear above 15,000 to 17,000 Hz. Also, many headphones and speakers do not reproduce that range well. If you are worried about your hearing, see a health professional: this test is not a hearing exam.
I can't hear the 30 Hz bass. Are my headphones bad?
Not necessarily. 30 Hz bass is hard to reproduce for small headphones and laptop speakers. Many headphones start to sound good from 40 or 50 Hz.
Can it damage my headphones or my ears?
Not at moderate volume. Start low and turn it up gradually, especially for the frequency sweep: high frequencies can be unpleasant even when they sound soft.
Does it work on phones?
Yes, with wired or Bluetooth headphones. Some phones play mono through the speaker: for the left and right test, use headphones.
More tools: mic test · webcam test · all tools · en español