Skip to content
PCTestHub
Home/PSU calculator

PSU calculator: what power supply do I need?

Pick your CPU and graphics card and get the recommended power supply wattage, with a breakdown by part and what your PC costs to run per month at US and UK electricity prices.

Pick your CPU and graphics card to see the power supply you need.

What it costs to run

How we calculate the power supply

We add up the maximum power each part can draw: the graphics card's official board power, the CPU's maximum turbo power (Intel PL2 / Maximum Turbo Power, AMD PPT), and typical figures for the motherboard, RAM, drives, fans, cooler, lighting and USB devices. That is the peak load.

  • Recommended: a power supply that stays at or below 80% load at that peak, rounded up to a common size. It leaves headroom for the short power spikes of modern graphics cards and keeps the fan quiet and the efficiency high. If the graphics card maker recommends a bigger unit, we use theirs.
  • Minimum: 10% above the peak load. It works, but with little margin for spikes, upgrades or an ageing PSU.

Factory-overclocked graphics cards can draw 10% to 20% more than the reference figure: if you have one, choose «Overclocking: Yes».

The table with the official power draw of 33 graphics cards and the power supply each one needs with two different processors is in our guide What power supply does your graphics card need?.

What to look for in a power supply

  • Wattage: the recommended figure above. More wattage than you need does not waste power: the PC only draws what it uses.
  • Efficiency: 80 Plus Gold or better (or Cybenetics Gold). Less power is lost as heat and the electricity bill is a bit lower.
  • ATX 3.1 and 12V-2x6: most GeForce RTX 40 and 50 series cards use a 16-pin 12V-2x6 (12VHPWR) power connector. An ATX 3.1 power supply has a native cable for it and is designed for the power spikes of current graphics cards.
  • A trusted brand and warranty: the power supply feeds every other part. A good unit usually comes with a 7 to 12 year warranty.

How we estimate the running cost

While gaming, the graphics card and CPU rarely sit at their maximum at the same time, so we use about 90% of the graphics card power and the CPU's base power level, plus the rest of the parts, and divide by a typical power supply efficiency (88%) to get the power at the wall. For light use (browsing, video) we use a typical idle-to-light load. Prices are residential averages: your plan may be higher or lower, and the UK figure does not include the daily standing charge, which you pay whether the PC is on or not.

Frequently asked questions

Is a bigger power supply bad?

No. A PC only draws the power it needs; a bigger unit simply runs at a lower load. The only downsides are price and, with very oversized units, slightly lower efficiency at idle.

Can I use the recommended wattage from the graphics card box?

Yes. Graphics card makers recommend a total system power assuming a high-end CPU, so their figure is safe. We show it next to ours when it is available.

Does it work for laptops?

No. Laptops use the power adapter that came with them. Use the adapter from the laptop maker, with the same wattage or higher.

My CPU or graphics card is not in the list

Type it anyway: if we do not have its power figure, a box appears to enter it. You will find it on the maker's spec page as TDP, PL2, PPT, «Total Graphics Power» or «Typical Board Power».

More tools: bottleneck calculator · FPS calculator · all tools · en español