Skip to content
PCTestHub

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (0x7E) blue screen: what it means and how to fix it

A system thread failed with no handler. Below you will find the most common causes and the steps to fix it, in order. To look up another code, use the search box.

Blue screenSYSTEM_THREAD_EXCEPTION_NOT_HANDLED · 0x0000007E

A system thread failed with no handler

A system process raised an error that could not be handled. It is almost always a driver; the screen usually names the .sys file that failed (for example, the graphics driver).

Why it happens

  • An incompatible graphics, network or audio driver, often right after an update.
  • A driver from a newly installed program.
  • Damaged Windows files.

How to fix it

  1. Check whether the blue screen says «What failed:» followed by a file ending in .sys: that is the driver that caused the error. Search for that name to find out which device it belongs to (for example, nvlddmkm.sys is the NVIDIA graphics driver) and update or reinstall that driver.
  2. Reinstall the graphics driver: download the latest stable version from NVIDIA, AMD or Intel (on laptops, preferably from the laptop maker), uninstall the current one from Settings › Apps and install the new one.
  3. Update the graphics, chipset, network and storage drivers from the support page of your PC or laptop maker. If the problem started after updating one, roll it back: Device Manager › right-click the device › Properties › Driver › Roll Back Driver.
  4. Think about what changed right before it started: a program, a driver, an update or a new part. Uninstall or remove it and try again.
  5. If it started recently, go back to an earlier point with System Restore: press Windows + R, type rstrui and pick a point from before the problem. Your documents are not touched.
  6. If Windows does not start, open the Recovery Environment (it appears on its own after two or three failed starts, or from a Windows installation USB › Repair your computer). Under Troubleshoot › Advanced options you have Startup Repair, System Restore, Uninstall Updates and Startup Settings (to enter Safe Mode).

Meaning based on Microsoft's official documentation. The steps are general guidance: if you are not sure, ask a technician for help.

How to find the code of a blue screen

The error screen shows the code on the «Stop code» line (for example CRITICAL_PROCESS_DIED) and sometimes «What failed» with the file that caused it (for example nvlddmkm.sys). In recent Windows 11 versions that screen is black instead of blue, but the codes are the same.

If the computer restarts before you can read it, the code is saved: press Windows + R, type eventvwr and go to Windows Logs › System. Look for an event with source BugCheck: it shows the code in hexadecimal (for example 0x0000007e), which you can also type in the search box. To stop Windows from restarting by itself so you can read the screen, go to Advanced system settings › Startup and Recovery › Settings and uncheck «Automatically restart».

What to do with any blue screen

This works for any code, including the ones without their own explanation. These are Microsoft's general steps, in the order worth trying them:

  1. Write down the code and the file shown in «What failed», if any: they tell you what failed.
  2. Think about what changed before it started (a program, a driver, an update or a part) and undo it. System Restore (rstrui) goes back to an earlier point without touching your documents.
  3. Install Windows updates and the drivers from your PC maker's website; if the problem started with a new driver, roll back to the previous one.
  4. Update the BIOS from the maker's website, with the charger connected.
  5. Test the hardware: memory with mdsched and the drive with chkdsk C: /f. If you raised speeds (overclock or XMP), go back to default values.
  6. Scan for malware with Windows Security (Microsoft Defender Offline scan).
  7. Free up space: Microsoft recommends 10% to 15% of the drive.
  8. Repair Windows with DISM /Online /Cleanup-Image /RestoreHealth and sfc /scannow in Command Prompt as administrator.

If Windows does not start, the Recovery Environment appears after two or three failed starts: from Troubleshoot › Advanced options you can use Startup Repair, System Restore, Uninstall Updates or enter Safe Mode.

Most common blue screens

Windows Update errors

Activation errors

Windows startup errors

Errors when opening programs

Meanings come from Microsoft's official documentation (bug check code reference and the page of each error), checked on November 17, 2026. The texts and steps are our own. See all codes → En español