Skip to content
PCTestHub

KERNEL_STACK_INPAGE_ERROR (0x77) blue screen: what it means and how to fix it

Windows could not read system data from the drive. Below you will find the most common causes and the steps to fix it, in order. To look up another code, use the search box.

Blue screenKERNEL_STACK_INPAGE_ERROR · 0x00000077

Windows could not read system data from the drive

Windows could not bring back into memory part of its data stored in the page file. According to Microsoft, it is usually faulty hardware: RAM, the drive or its connection.

Why it happens

  • Failing RAM.
  • Bad sectors or a failing drive.
  • Worn drive cables or connectors.

How to fix it

  1. Before trying fixes, back up your important files to another drive or to the cloud: if the drive is failing, every start counts.
  2. Check the drive: in Command Prompt as administrator run chkdsk C: /f and accept checking it on the next restart. If the drive is old, makes noises or shows errors, back up your files as soon as possible.
  3. Check the health of the hard drive or SSD (SMART status) with its maker's free tool and, if it is an SSD, update its firmware from there.
  4. Test the RAM: press Windows + R, type mdsched and choose «Restart now and check for problems». If you have two sticks, also try with one at a time.
  5. On a desktop PC, check or replace the drive cables.

Still happening? It is almost always the RAM or the drive: it is worth testing both.

Meaning based on Microsoft's official documentation. The steps are general guidance: if you are not sure, ask a technician for help.

How to find the code of a blue screen

The error screen shows the code on the «Stop code» line (for example CRITICAL_PROCESS_DIED) and sometimes «What failed» with the file that caused it (for example nvlddmkm.sys). In recent Windows 11 versions that screen is black instead of blue, but the codes are the same.

If the computer restarts before you can read it, the code is saved: press Windows + R, type eventvwr and go to Windows Logs › System. Look for an event with source BugCheck: it shows the code in hexadecimal (for example 0x0000007e), which you can also type in the search box. To stop Windows from restarting by itself so you can read the screen, go to Advanced system settings › Startup and Recovery › Settings and uncheck «Automatically restart».

What to do with any blue screen

This works for any code, including the ones without their own explanation. These are Microsoft's general steps, in the order worth trying them:

  1. Write down the code and the file shown in «What failed», if any: they tell you what failed.
  2. Think about what changed before it started (a program, a driver, an update or a part) and undo it. System Restore (rstrui) goes back to an earlier point without touching your documents.
  3. Install Windows updates and the drivers from your PC maker's website; if the problem started with a new driver, roll back to the previous one.
  4. Update the BIOS from the maker's website, with the charger connected.
  5. Test the hardware: memory with mdsched and the drive with chkdsk C: /f. If you raised speeds (overclock or XMP), go back to default values.
  6. Scan for malware with Windows Security (Microsoft Defender Offline scan).
  7. Free up space: Microsoft recommends 10% to 15% of the drive.
  8. Repair Windows with DISM /Online /Cleanup-Image /RestoreHealth and sfc /scannow in Command Prompt as administrator.

If Windows does not start, the Recovery Environment appears after two or three failed starts: from Troubleshoot › Advanced options you can use Startup Repair, System Restore, Uninstall Updates or enter Safe Mode.

Most common blue screens

Windows Update errors

Activation errors

Windows startup errors

Errors when opening programs

Meanings come from Microsoft's official documentation (bug check code reference and the page of each error), checked on November 17, 2026. The texts and steps are our own. See all codes → En español