Skip to content
PCTestHub
Guide · Display

Laptop Turns On but the Screen Is Black? What to Check First

A light or a spinning fan does not mean it started. Outside checks, without opening the laptop, to tell a display problem from a startup problem.

In this guide

If your laptop turns on but the screen stays black, start by turning the brightness up and watching for any picture or the brand logo. A light that comes on or a fan that spins shows activity, but it does not confirm the laptop has finished starting. Nor is it enough to conclude that the screen needs replacing.

This guide suggests outside checks, without opening the laptop. The shortcuts, ports and diagnostics available depend on the brand and model.

Stop before testing if there was liquid, a burning smell, smoke, unusual heat or a swollen battery. Stop using and charging the laptop. Unplug the charger if you can do so safely and have it checked. Do not press on the case or try to remove a deformed battery.

Where to start

What you seeWhat it suggests
The brightness was very lowThe picture comes back when you turn it up. Check the setting and watch whether it happens again.
There is a very faint pictureOn an LCD screen it can point to the backlight or its control. It does not identify a part.
The logo appears and then goes darkNote when it happens. The system, the drivers and the video output all come into the check.
A picture never appearsNo video has to be told apart from a startup failure. Lights and beeps can add information.
Our own outline. Symptoms guide the tests; they are not a diagnosis.

1. Turn the brightness up before thinking about a part

Find the key that raises the screen brightness, usually marked with a sun. Press it several times; on some models it is used with Fn. There is no universal combination such as Fn + F5 or Fn + F6: check the symbols on your keyboard or your laptop's manual. Do not confuse it with the keyboard backlight.

If you can make out the desktop, check the brightness control too:

  • Windows: Settings → System → Display → Brightness, when available.
  • Mac: System Settings (or System Preferences) → Displays → Brightness, depending on the macOS version.

Minimum brightness can make a screen look off, especially in bright surroundings. If turning it up brings back a normal picture, check whether the setting drops again on battery or whether automatic brightness is on. An option not appearing can depend on the laptop or on the connected display.

References: Dell: checks for a black screen, Microsoft: change display brightness in Windows and Apple: adjust the brightness on your Mac.

2. Tell a faint picture from no picture

If, after turning the brightness up, you can barely make out text, windows or the logo, note that detail. On an LCD screen, the picture and the light that makes it visible are separate things. A very faint picture can point to the backlight, its power or its control, but the whole assembly needs checking.

Does the flashlight test help?

As a rough check on an LCD screen, you can shine a flashlight at an angle, without resting or pressing anything on the panel, and see whether a picture can be made out. Only do it if the laptop shows none of the risk signs listed at the top.

  • If you see a picture: it confirms something is visible at that moment. It does not prove by itself that the panel, the flex cable or the motherboard are fine, or which one needs repairing.
  • If you see nothing: that does not prove the panel is broken either. There may be no picture being generated, or it may not be visible this way.

This reasoning about the backlight applies to LCD screens. OLED screens produce light in their own pixels and have no separate backlight, so the same logic should not be applied to them.

3. Note when the picture disappears

  • The logo never appears: there may be a display problem or a problem with the laptop's startup checks.
  • The logo appears and then it goes black: it matters whether this happens before the system loads, at sign-in or after an update.
  • You see the cursor on a black background: that is useful information for checking Windows and its processes.
  • The picture changes when you move the lid: leave the lid in a stable position. Do not repeat the movement or force the hinges to get the picture back (see laptop hinge broken or case opening).
  • There are beeps or flashing lights: note the colors, the count and the pauses. The codes have to be read with the manual for your exact model.

Dell separates no power, no POST, no boot and no video. That distinction avoids treating every case as a damaged screen.

4. Try an external monitor, if you have a compatible one

  1. Check that the monitor works, is on and has the right input selected, for example HDMI.
  2. Use a compatible cable and video port. If you use USB-C, check in the manual that the port and the adapter support video output.
  3. Connect the monitor straight to the laptop when possible, to rule out a dock or extra adapter. Do not force the connectors.
  4. If Windows is running and you can see the menu, press Windows + P and choose Duplicate to check both screens. Do not keep changing options blindly.

The external screen shows a picture but the built-in one does not: that is a clue to check the built-in screen, its connections and its settings. It does not certify that the whole motherboard or graphics system is healthy. If you can work normally, use the chance to save and back up your files.

Neither screen shows a picture: check the input, the cable and compatibility first. The laptop may not have started, or may not be sending video through that port. This test alone cannot condemn the screen or the motherboard.

References: HP: telling display problems from startup problems and Microsoft: using multiple monitors in Windows.

5. If the problem appears while Windows loads

These steps apply when Windows seems to have started or the screen goes dark while you are using it. They do not fix a lack of power, and they do not replace a diagnosis if a picture never appears.

  • Press Windows + Ctrl + Shift + B once. It is a shortcut that restarts the graphics driver. You may hear a beep or see a flicker.
  • Try Ctrl + Alt + Delete. If the security screen appears, the laptop is responding. From there you can open Task Manager; if the desktop does not load, find Windows Explorer and select Restart.
  • If the picture comes back, save your work. Note whether the problem started after an update, when waking from sleep or when connecting another monitor.

If it happens again, the check can continue in safe mode or with the manufacturer's own driver. Avoid generic programs that promise to fix every driver. Microsoft's official guide to black or blank screens separates these scenarios. If a blue screen with a code appears, look it up in Windows error codes.

What if it is a MacBook?

Start with the brightness too and, if you have a compatible connection, with an external display. The Windows shortcuts do not apply to macOS.

If the Mac gets stuck at startup, Apple recommends checking whether it can start in macOS Recovery. How you get there differs: on a Mac with Apple silicon, press and hold the power button until you see the startup options; on an Intel Mac, use Command + R at startup. Follow Apple's full instructions for your type of Mac.

Entering Recovery does not mean erasing the disk. Do not choose Erase, reinstall or restore firmware as a first test. If there is no picture, or the data matters and you have no backup, ask before going on. Apple covers the steps in its guide to a Mac that starts up to a blank screen.

What not to do blindly

  • Do not interrupt an update in progress. There can be periods with no picture. HP warns that turning off or unplugging during a BIOS update can damage the computer. Wait and check your model's instructions before assuming it is stuck.
  • Do not force shutdowns over and over. Unsaved changes can be lost. If a power reset is needed, use the manufacturer's specific procedure; do not open the laptop to remove an internal battery.
  • Do not update or restore the BIOS as a test. Confirm the model, the procedure and a stable power supply before any intervention.
  • Do not remove RAM or disconnect the flex cable as a first test. Some laptops have soldered memory and delicate connections. Do not follow a tutorial for another laptop just because it looks like yours.
  • Do not buy a screen based only on its size. The part number, resolution, connector, mounting and other compatibility details all need checking.

See HP's warnings about computers that do not start. For deformed batteries, Dell says to stop using them and get assistance.

Some manufacturers offer built-in screen self-tests, such as Dell's LCD-BIST. Only use them if they apply to your laptop, following their documentation. There is no key combination that works for every brand. A passing result does not fully rule out an intermittent fault either.

Protect your files before repairing the system

A black screen is no reason to format the drive as a first step. If the picture comes back or you can use an external monitor, copy your important files before making software changes.

If the laptop uses BitLocker, make sure you have the recovery key before any firmware or hardware work: some changes can make Windows ask for it. Microsoft explains where to find it. Do not post passwords or recovery keys in questions or screenshots.

If there is no backup, agree on the priority of the data first. Whether it can be recovered depends on the storage, the damage and the encryption.

When to take it in and what information to send

Have the laptop checked if there is still no picture after these checks, if the fault comes back, if there are lines or dark areas, or if it changes when you move the lid. A knock, liquid or a recent repair also changes the diagnosis.

To prepare, gather this information:

  • The exact brand and model.
  • Whether the logo appears and when the screen goes dark.
  • Whether there is a very faint picture and whether it changes when you turn up the brightness.
  • The result with an external monitor and the connection used.
  • Lights, beeps and their patterns.
  • When it started, recent changes and the files you need to keep.

A photo or short video of the symptom can help; avoid showing personal information. You do not need to identify the damaged part.

To rule out a fault in the panel itself once the picture is back, use our dead pixel test: it fills the screen with solid colors to find dead pixels, patches or dark areas.

Official sources checked on October 16, 2026. An informational guide: specific tests and repairs depend on the model and the diagnosis of the laptop.

Leer en español