Refresh rate test: how many Hz is your monitor really running at?
Measure your screen's real refresh rate (60, 120, 144, 165, 240 Hz…), count dropped frames and compare how motion looks at different refresh rates.
- Status
- Measuring
- Frame time
- –
- Dropped (10 s)
- –
- Resolution
- –
The top lane updates every frame; the others every 2 and every 4 frames. The bigger the difference you notice between the first and the second, the more you get out of your monitor's Hz. The test has no flashing.
How it measures the refresh rate
The browser draws the page in step with the screen: on a 144 Hz monitor, about 144 times per second. The tool records when each frame happens, works out the typical time between frames (6.94 ms at 144 Hz, 16.67 ms at 60 Hz) and turns it into Hz. It uses the median, so a single hiccup does not change the result.
Dropped frames are the ones that took much longer than normal. A few while the page loads or when you switch tabs are normal; if they keep dropping, your computer or browser can't draw at that rate.
My monitor is 144 Hz but the test shows 60: what to check
- The refresh rate set in Windows. In Windows 11: Start → Settings → System → Display → Advanced display, and pick the highest rate under «Choose a refresh rate». Many monitors ship set to 60 Hz.
- Where the cable is plugged in. On a desktop PC with a graphics card, the monitor has to be connected to the graphics card, not to the motherboard's video output.
- The cable and the port. Some HDMI cables or older adapters can't carry the monitor's full resolution and refresh rate at the same time. Try the cable that came with the monitor, or DisplayPort if it has one.
- Windows 11 dynamic refresh rate. On displays that support it (at least 120 Hz and variable refresh rate), Windows lowers the refresh rate when nothing is moving. Microsoft notes it can limit the refresh rate in some games; you can turn it off on the same Advanced display page.
- Laptop on battery. Some laptops lower the screen refresh rate when unplugged to save power. Run the test again with the charger connected.
- Several screens. The browser follows the refresh rate of the screen the window is on. Move the window to the monitor you want to test and reload the page.
What to look for in the motion test
Follow the block with your eyes. The higher the refresh rate, the smoother the motion and the sharper the stripes on the block. In the half-rate lane the block jumps in bigger steps: that is what you see when a game runs at half the FPS your monitor can show. If you see a clear trail behind the block in the top lane, that is the panel's response time («ghosting»), which depends on the monitor and its overdrive mode.
Frequently asked questions
How accurate is it?
It measures the refresh rate to within 1 Hz when the computer is idle. 59.94 Hz monitors show as 60 Hz, which is how Windows lists them.
Does it work on a phone?
Yes. Many phones have 90 or 120 Hz screens, but drop to 60 Hz in battery saver or in some apps; some browsers also limit animations to save power. If a 120 Hz phone shows 60 Hz, turn off battery saver and measure again.
Are a game's FPS the same as Hz?
No. Hz is how many times per second the screen shows an image; FPS is how many images the PC prepares. A 144 Hz monitor only pays off if the game gets close to 144 FPS. To see how many FPS a game will give you, use Can I run it?.
Why does the result go up and down?
If the PC is busy (an update, lots of open tabs), frames get dropped. Close what you don't need and leave the page still for a few seconds.
More tools: dead pixel test · reaction time test · all tools · en español