If your PC shows no Wi-Fi networks after a clean install or an update, the Wi-Fi card's driver is almost always missing. To install it you need internet some other way (a network cable or your phone over USB), or you download the driver on another computer and bring it over on a USB flash drive. This guide follows the steps Microsoft publishes, in order, from the simplest to the most technical.
None of these steps erases your files. Always use the driver from the official support page of your computer's brand or of the Wi-Fi card: Microsoft advises against downloading drivers from other sites.
1. Make sure the driver is the problem
Before looking for drivers, rule out the simple things: some laptops have a Wi-Fi switch or key (or airplane mode turned on), and Wi-Fi has to be on in Settings › Network & internet. Then open Device Manager (right-click the Start button) and look at these two sections:
| What you see | What it means | What to do |
|---|---|---|
| Under "Network adapters" there is one with "Wi-Fi", "Wireless", "WLAN" or "802.11" in its name. | The driver is installed. | If it has a down arrow, it is disabled: right-click › Enable device. If it stopped working after an update, go to step 6. |
| Under "Other devices" there is a "Network Controller" with a yellow triangle. | Windows has no driver for the Wi-Fi card. | Get online another way (step 2) or download the driver on another PC (step 3). |
| Nothing Wi-Fi related appears in any section. | The card is turned off in the BIOS, disconnected or damaged, or the computer has no Wi-Fi. | Check the switch and the computer's BIOS; a desktop PC may simply not have Wi-Fi. |
2. Get online another way
Once online, Windows Update usually finds the driver on its own. Microsoft suggests these alternatives:
- Network cable: connect the PC to the router with an Ethernet cable. If the computer has no network port, a USB to Ethernet adapter works. For this to work, the wired network card has to appear under "Network adapters".
- Your Android phone over USB: connect it with the cable and, in the phone's settings, open the hotspot or tethering section (the name varies by brand) and turn on USB tethering. According to Google, it shares the phone's mobile data, not its Wi-Fi.
Once connected, go to Settings › Windows Update › Check for updates. Also check Advanced options › Optional updates: drivers that Windows doesn't install on its own show up there. If the Wi-Fi networks appear after restarting, you are done.
3. Download the driver on another computer
If you have no cable and no phone to share a connection, use another computer or your phone to download the driver and copy it over with a USB flash drive:
- Find the exact model of the computer: it is on the label under the laptop or on the box. In Official driver downloads you pick the brand and go straight to its driver page.
- On the brand's support page, choose your model and your Windows (11 or 10, 64-bit) and download the driver from the network or Wireless/WLAN section. If there are several (Intel, Realtek, MediaTek, Qualcomm), the next step tells you which one is yours.
- Copy the file to a USB flash drive and take it to the PC without Wi-Fi.
To find out who made the Wi-Fi card, in Device Manager right-click "Network Controller" › Properties › Details and under "Property" choose Hardware Ids. The number after VEN_ is the maker:
| Starts with | Card maker |
|---|---|
PCI\VEN_8086 | Intel |
PCI\VEN_10EC | Realtek |
PCI\VEN_14C3 | MediaTek |
PCI\VEN_168C or PCI\VEN_17CB | Qualcomm (Atheros) |
PCI\VEN_14E4 | Broadcom |
USB\VID_ instead of VEN_.If you paste that line into the device identifier in our drivers tool, it tells you the maker and where to find the driver.
4. Install the driver from the USB drive
- If it is an .exe file: run it and follow the installer. Restart when it finishes.
- If it is a .zip or a folder with .inf files: unzip it. In Device Manager, right-click "Network Controller" › Update driver › Browse my computer for drivers › Browse, choose the folder and click Next. This is the manual method Microsoft describes.
You can also install every .inf in a folder from Command Prompt as administrator (replace D:\wifi with the folder on your USB drive):
pnputil /add-driver D:\wifi\*.inf /subdirs /install
5. If there are no networks while setting up Windows 11
According to Microsoft, Windows 11 Home and Pro need an internet connection to finish setup. If no network appears on the connection screen, try a network cable or your phone over USB first. If you can't, Microsoft explains how to load the driver from a USB drive on that same screen:
- On another computer, download the Wi-Fi driver from the brand's page, unzip it and copy the files to the USB drive. The .inf file has to be in the root of the drive, not inside a folder.
- Plug in the USB drive and press Shift + F10 to open Command Prompt.
- Type
diskpart, thenlist volume, and note the USB drive's letter ("Ltr" column). Typeexitto leave. - Type
pnputil /add-driver D:\*.inf, replacing D with the USB drive's letter. If needed, then runpnputil /scan-devices.
If the driver comes as an .exe, Microsoft says running it may be enough.
6. If Wi-Fi stopped working after an update
If the card appears under "Network adapters" but won't connect, or Wi-Fi disappeared after a Windows update, try these in order:
- Download a backup driver first from the brand's page (step 3), in case Windows doesn't reinstall it on its own.
- Reinstall the driver: in Device Manager, right-click the Wi-Fi card › Uninstall device, check Attempt to remove the driver for this device and restart. Windows installs the driver again; if it doesn't, install the one you downloaded.
- Turn off the card's power saving: right-click the card › Properties › Power Management and uncheck "Allow the computer to turn off this device to save power".
- If the Wi-Fi option disappeared, restart the service: Windows + R, type
services.msc, find WLAN AutoConfig, right-click › Restart. - Reset the network stack with the commands in the Internet section of Windows repair commands (
netsh winsock resetand the others). - As a last step, Microsoft suggests Settings › Network & internet › Advanced network settings › Network reset › Reset now. It removes every network adapter and its settings and reinstalls them on restart; afterwards you may need to reinstall VPN software.
7. Next time: save your drivers before a clean install
Windows includes PnPUtil, which copies every installed driver to a folder. Before wiping, in Command Prompt as administrator (replace D:\drivers with a folder on a USB drive):
pnputil /export-driver * D:\drivers
After reinstalling, step 4 installs that whole folder, Wi-Fi included. There are more details in how to reset or reinstall Windows.
Sources
- Microsoft: fix Wi-Fi connection issues in Windows
- Microsoft: get connected when setting up your Windows device
- Microsoft: update drivers through Device Manager
- Microsoft: PnPUtil command syntax
- Google: share a mobile connection by tethering on Android
Official sources checked on November 21, 2026. Menu names may vary with the Windows version and the phone brand.