To check your laptop's battery health in Windows 11, create a report with powercfg /batteryreport and compare the full charge capacity with the design capacity. That ratio tells you roughly how much capacity the battery has kept; on its own it does not confirm the battery's physical condition, and it cannot promise how many hours it will last.
The steps work on any laptop that can be used safely. You do not need to install any app. The charge percentage in the taskbar and the capacity a battery has kept are two different things.
Before you start: when to stop
If the case has separated, the keyboard or touchpad is lifting, or you suspect the battery is swollen, stop using and charging the laptop. Turn it off and unplug the charger if you can do so safely. Do not press on the case, puncture the battery or try to pry it out. Have it checked and ask how to transport it safely.
A report with numbers that look normal does not rule out physical damage. Microsoft includes this warning in its battery care recommendations, and Dell publishes specific instructions for swollen batteries.
1. Create and open the battery report
- Open Start, type Command Prompt and select Run as administrator. Accept the prompt if you are allowed to manage that computer.
- Type the command below and press Enter. Leave a space between
powercfgand/batteryreport. - Windows shows where it saved the HTML file. Copy that path, or find it in File Explorer, and open the report in your browser.
powercfg /batteryreport
These are the steps documented by Microsoft for Windows 11. If you want to save it somewhere else, powercfg accepts the /output option; use an existing folder you can write to. If an error appears, keep its text before changing any settings.
You can also drop the report into our battery health check: it reads the file in your browser (nothing is uploaded) and does the calculation below for you.
2. Look at the capacities, not just the charge percentage
The Installed batteries section can show these fields:
| Report field | How to read it |
|---|---|
| Design capacity | The rated capacity reported for that battery. |
| Full charge capacity | The estimated capacity it can hold when fully charged. It is not the energy it has right now. |
| Cycle count | The number of charge cycles reported to the system, when available. A dash or an empty field does not prove the battery has zero cycles. |
Check the units before comparing. You will usually see mWh; 1,000 mWh equals 1 Wh. Do not compare mWh directly with mAh. If there are several batteries, check each one separately. Microsoft distinguishes full charge capacity from design capacity in its technical documentation.
3. Work out the capacity kept, with an example
Use this ratio only when both values are present, valid and in the same unit:
Capacity kept (%) =
Full charge capacity / Design capacity × 100
Made-up example: a design capacity of 50,000 mWh and a full charge capacity of 35,000 mWh give 35,000 ÷ 50,000 × 100 = 70%. The difference from the design figure is 30%. These are not measurements from a real laptop.
Our own diagram. Illustrative values.
A battery can show 100% charge and still hold less than when it was new: it is full relative to the capacity it can store now. Nor should the 70% in the example be read as "70% of its life left" or as a fixed number of hours.
Dell notes that full charge capacity can vary. Treat the ratio as an estimate and compare it with how the battery actually behaves and with the manufacturer's diagnostics. A single figure is not a certificate of good health.
4. Check the history and describe what happens
Look at Battery capacity history to see the recorded capacities and Recent usage to see periods of use. Battery life estimates shows estimates: compare them with your own experience, without treating them as a promise of runtime.
- The reported capacity has dropped and the battery no longer lasts long enough: gather the data to test the battery with the diagnostics for your model.
- The capacity looks reasonable, but it runs out quickly: note the task, the brightness and the programs open. A video call or a game is not comparable with editing a document.
- It shuts off suddenly or the percentage jumps: keep a record of the symptom and have it checked. The report alone cannot tell whether the battery, its measurement or another part is failing.
- It stays at a fixed charge limit: check whether the manufacturer has turned on a charge-saving feature before reading it as wear.
If the main problem is that it does not charge at all, see laptop plugged in but not charging. That check answers a different question: a battery that charges can be worn, and a laptop that does not charge can have a power problem.
What to do if data is missing or the numbers look odd
If a capacity is missing, the design capacity is zero or the units do not match, do not calculate the percentage. If it shows more than 100%, keep the values and compare them with the manufacturer's tool; do not adjust them by hand to make them fit. The report depends on the information Windows receives.
Look for the official diagnostics for your full brand and model. Avoid programs that promise to restore a battery chemically with one click. Creating the report does not recover any capacity. You also do not need to drain it to zero repeatedly to get the report; Microsoft advises avoiding frequent deep discharges.
When is it worth replacing the battery?
Consider having it checked when the runtime no longer covers your use, unexpected shutdowns appear or the manufacturer's diagnostics flag a fault. With swelling or physical damage, the priority is to stop using the laptop, even if the percentage looks fine. No single percentage from this report settles every case and model.
To price a replacement, identify the exact model and the compatible battery part number. Do not buy based on how the part looks. Opening the laptop and disconnecting the battery require the manufacturer's procedure; this guide is not a disassembly manual.
What to keep before asking for help
- Full brand and model, the date of the report and a description of the problem.
- Design capacity and Full charge capacity with their units; Cycle count only if it appears.
- Approximate runtime in a familiar task, and any shutdowns, percentage jumps or charge limits.
- The result of the official diagnostics, if they could be run safely.
Before sharing the full HTML report or a screenshot, check whether it shows the computer name, serial numbers or other details you would rather hide. For a first question, the relevant fields and the symptom are usually enough.
Sources
- Microsoft: battery report and battery care
- Microsoft Learn: powercfg command-line options
- Dell: reading the battery report
- Microsoft Learn: battery capacity (Win32_Battery)
- Dell: handling swollen batteries
Sources checked on October 18, 2026. The numeric example is illustrative; no tests on real laptops are presented.