Skip to content
PCTestHub
Guide · PC specs

How to Check Your PC Specs in Windows 11 and 10, Part by Part

Four tools that come with Windows show every spec of your PC. Which one to use for the CPU, RAM, graphics card, drive, model and BIOS.

In this guide

To check your PC or laptop specs in Windows 11 or Windows 10, right-click Start › Settings › System › About. There you will find the processor, the installed RAM, whether Windows is 64-bit, and the Windows edition and version. For the rest (the graphics card, the drive type, RAM speed or the BIOS) there are three more tools that come with Windows; below we tell you which one to use for each detail.

What you want to knowWhere to look
Processor and installed RAMSettings › System › About
Processor coresTask Manager › Performance › CPU
RAM speed and slots usedTask Manager › Performance › Memory
Graphics card and its memoryTask Manager › Performance › GPU, or DxDiag
Whether the drive is an SSD or HDDTask Manager › Performance › Disk
Free spaceSettings › System › Storage
Windows versionSettings › System › About
Computer model, motherboard and BIOSSystem Information (msinfo32)
All four tools come with Windows 11 and Windows 10.

1. Settings › About: the basics

This is the route Microsoft gives: right-click Start › Settings › System › About. The device name and model are at the top. Below:

  • Device specifications: the processor, installed RAM and system type (32-bit or 64-bit Windows).
  • Windows specifications: the edition (Home or Pro) and the version (for example, 24H2). To see whether that version still gets updates, use the Windows support check.
  • On an up-to-date Windows 11, there are also cards at the top with the processor, RAM, storage and graphics, which Microsoft added in the March 2025 update.

If the RAM says something like "16.0 GB (15.7 GB usable)", no memory is missing: the difference is the part the computer reserves, for example for integrated graphics.

2. Task Manager: cores, RAM, drive and graphics

Open it with Ctrl + Shift + Esc and go to Performance. Each part has its own section:

  • CPU: the model at the top right and, below, the cores and logical processors, as Microsoft explains. Also the base speed and whether virtualization is enabled.
  • Memory: the total, the speed (in MT/s or MHz), how many slots are used out of how many there are, and the form factor (DIMM on desktops, SODIMM on laptops). If you have free slots, you can add memory; if it says 2 of 2, the modules would have to be replaced. To see how much you need, check How much RAM do I need?, and for laptops, can you upgrade your laptop's RAM?
  • Disk: the model and the type (SSD or HDD). If Windows is on an HDD, moving it to an SSD is the upgrade you will notice most; we explain it in slow laptop: SSD or more RAM?
  • GPU: the graphics card model and its dedicated memory. If two appear, you have an integrated and a dedicated GPU: see what graphics card do I have?

3. Settings › Storage: your space

In Settings › System › Storage you can see how much each thing takes on the Windows drive. If you have more than one drive, Microsoft says to go to Advanced storage settings › Storage used on other drives to see them all together.

Does your 1 TB drive show up as 931 GB? Nothing is missing: the maker counts in units of 1000 and Windows in units of 1024. The drive capacity calculator tells you which number yours should show.

4. System Information: model, motherboard and BIOS

This is the most complete tool. According to Microsoft, you open it with Windows + R, typing msinfo32 and pressing Enter, and it shows the computer's hardware, components and software. Under System Summary you will find:

  • System Manufacturer and System Model: the exact model of your laptop or branded PC, which is what you need to download drivers from its official site (official drivers by brand has each maker's page).
  • BIOS Version/Date and BIOS Mode (UEFI or Legacy).
  • BaseBoard Manufacturer and BaseBoard Product, useful on custom-built PCs to look up which processors or memory the motherboard supports.
  • Secure Boot State, one of the Windows 11 requirements. To check them all, use the Windows 11 compatibility check.

To share them or ask for help: DxDiag

If someone asks you for "your PC specs", the most practical option is a DxDiag report: type dxdiag in the taskbar search box, open it and use Save All Information…. Microsoft recommends it when asking for support. If you want to read it yourself, the DxDiag analyzer turns it into a clear summary without uploading the file anywhere.

With your specs in hand

Steps based on Microsoft's support pages, checked on November 19, 2026.

Leer en español