Skip to content
PCTestHub
Home/BIOS file analyzer

BIOS file analyzer (.bin): check a chip dump

Load the file you read from the BIOS chip with a programmer (CH341A or another) and see whether the read is good, which regions it has, the Intel ME version, the MAC address and whether it holds the Windows key. The file never leaves your browser.

It only reads the file: it doesn't modify it, store it or send it anywhere. A dump contains data about that computer (serial number, MAC address and sometimes the Windows key).

What the analyzer checks

  • Size and likely chip: a full dump is the same size as the chip (4, 8, 16 or 32 MB). If the size is not a power of 2, it is probably not a chip read but an update file or an incomplete read.
  • Read quality: a file full of FF or 00 means an empty chip or a badly seated clip; if the second half repeats the first, a bigger chip than the real one was selected in the programmer.
  • Intel descriptor: on Intel machines the chip is split into regions (descriptor, Intel ME, BIOS, GbE network, EC). We show where each one starts and ends, and whether any is empty.
  • Intel ME version, read from its manifest (FTPR), and the MAC address of the onboard network controller if the chip has a GbE region.
  • AMD: whether it finds AMD's embedded firmware structure (signature 0x55AA55AA) or Platform Security Processor (PSP) tables.
  • BIOS vendor (AMI, Insyde, Phoenix, Award) and likely computer brand, from the text strings in the file.
  • Windows key stored at the factory (OA3), if it is in the file, hidden until you choose to see it.
  • Search for a value: type the serial number, model or MAC and see at which offsets of the file it appears.
  • Compare two reads: if two reads of the same chip are not identical, the connection to the chip is not stable.

How to read the chip with a programmer

  1. Find the chip: an 8-pin package (SOIC-8 or WSON-8) near the CPU or chipset, marked with a code like 25Q64, MX25L12835 or W25Q128. The number is the capacity in megabits: 64 = 8 MB, 128 = 16 MB.
  2. Check the voltage: many chips on recent laptops run at 1.8 V (for example W25Q64FW or the MX25U series) and need a 1.8 V adapter. Some CH341A programmers put 5 V on the data lines: check yours before using it.
  3. Disconnect everything: charger and battery. Fit the clip with pin 1 (the dot on the chip) on the marked side of the cable.
  4. Read twice and compare both reads here: they must be identical.
  5. Keep the original in two places before writing anything to the chip.

What is inside a dump

  • Descriptor (Intel): the map of the chip and the access permissions of each region. It takes the first 4 KB.
  • Intel ME (Management Engine): the firmware of Intel's management processor. If it is empty or damaged, the computer may shut down after 30 minutes or not boot at all.
  • BIOS (UEFI): the firmware that boots the computer, with its settings and variables (NVRAM).
  • GbE: the configuration of the onboard Intel network controller, including its MAC address.
  • EC: on some machines, the firmware of the controller that handles the keyboard, battery and fans.

AMD machines have no Intel descriptor: the chip holds AMD's embedded firmware structure and the firmware of its security processor (PSP) next to the BIOS.

Be careful sharing dumps or using someone else's

A dump stores data about that specific computer: serial number and model (DMI), MAC address, sometimes the factory Windows key, and the Intel ME configuration. So:

  • Don't post your full dump on forums: it carries your data.
  • A dump from another computer carries that other computer's data and may come from a different board revision or be modified. Whenever you can, use the official BIOS from the manufacturer's website (our official drivers page links to each brand's support site).
  • Before flashing, use the analyzer's search to find the serial number and MAC in the original dump: that way you know which data you need to keep.

Frequently asked questions

Is the file uploaded to a server?

No. The file is read in your browser with JavaScript and sent nowhere. You can go offline after the page loads and the analyzer keeps working.

Does it work with the update file from the manufacturer's website?

Those files (.exe, .cap or update .bin) usually hold only the BIOS region or have an extra header, so they are not a full chip dump. The analyzer tells you so from the size and the regions it finds.

Can it repair or modify the file?

No. It only reads it and shows what it finds. Editing regions or writing the chip needs the programmer's software and board repair experience.

My two reads are not identical. What should I do?

Check the clip (every pin must make contact), the chip voltage and that the computer has no battery or charger connected. Clean the chip's pins and read again until you get two identical reads.

More tools: DxDiag analyzer · official drivers · all tools · en español